Description:
4 in 1 tool! The hole in the middle can strip RG59/6 coaxial cables. One end to enlarge space between shield and insulation for RG59, one for RG6. The other end lock F connector tool socket and twist it into a stripped cable.
Stripping sizes:
The stripping length is preset to 6.5mm. Coaxial cable sizes RG59, RG6.
Instructions:
Step 1:
Push the button of the stripper to open stripping hole. Insert the coaxial cable to the hole you need in the direction as shown on the stripper.
Step 2:
Release the pushed button. Rotate the stripper 3-5 times up to the cable’s insulation is cut.
Step 3:
Push the stripper ‘s button and take out the cable.
Step 4:
Remove the inner insulation and jacket.
